Simplified Chinese (Traditional Chinese) Input Method
For example, create a file folder with the name "文件名". Note that the input method
of traditional Chinese is the same as that of the simplified Chinese.
Pinyin Input Area
Chinese Character Selecting Area
1. Select Chinese Input Method
If the current input method is "中/繁/En", please go to Step 2. If the current input
method is "En/中/繁" or "繁/En/中", rotate the multifunction knob to select the
input switch key and press the knob
continuously to switch to "中/繁/En". "中" is
located first and highlighted.
2. Clear the Pinyin Input Area and Name Input AreaIf there is no character in the
"Pinyin Input Area" and "Name Input Area", please go to Step 3. If there are
characters in the "Name Input Area" and "Pinyin Input Area", rotate the
multifunction knob to select the Delete key to delete all the characters in
the name input area in order.
3. Input the first Chinese character "文"
a. Input the pinyin "wen" in the "Pinyin Input Area"Rotate the multifunction knob
to select the first letter "w" in the pinyin "wen" and press down the knob to
input "w" in the "Pinyin Input Area".
Use the same method to input the remaining letters "en" in the pinyin "wen".
After finishing the input, the Chinese characters available are displayed in the
"Chinese Character Selecting Area".
Store and Load
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
335
To Next Page
Loading...
