Riso 9150 - Procedure

1-3
Overview of Print Operations
1
ComColor Series User’s Guide 09
The following are the components of the printer driver screen.
● The displayed settings vary depending on the selected item and how the administrator has configured the
settings.
● An option setting is displayed only when optional equipment required for that setting has been connected.
● The operations described in this guide use screenshots from Windows XP.
● Clicking [Restore default] restores all settings on the printer driver screen to their default values.
● When a multifunction finisher or other optional part has been connected, first configure [Printer configuration]. If
[Printer configuration] has not been configured correctly, the required buttons are not displayed on the printer
driver screen. (p. 1-33 "[Environment] Tab")
Procedure
The printing workflow is as follows.
Tabs Description See
Basic Specify basic print settings, such as for the color mode and paper used. p. 1-7
Layout Specify settings to impose, or to print images rotated. p. 1-12
Image Specify the image quality and density. p. 1-15
Finishing Specify finishing settings, such as for collation and booklet binding. p. 1-19
Advanced Specify advanced settings, such as for PIN codes and the print and pause
function.
p. 1-27
About Display printer driver information. p. 1-32
1 Display the printer driver screen
2 Configure the settings as needed
3 Click [OK]
4 Click [Print]