Riso 9150 - List of Settings

1-5
Overview of Print Operations
1
ComColor Series User’s Guide 09
List of Settings
The following is a list of the settings on the printer driver screen.
● The settings displayed on the screen vary depending on the selected item and how the administrator has
configured the settings.
● An option setting is displayed only when optional equipment required for that setting has been connected.
Setting Description See
[Basic] tab
Color mode Select color or monochrome printing. p. 1-7
Duplex print Specify simplex or duplex printing. p. 1-7
Original size Specify the paper size and orientation of the original. p. 1-8
Mixed size
*
1
*
2
Specify this when the original has multiple sizes. p. 1-8
Zoom
Specify enlargement or reduction of original images before printing, if needed. p. 1-9
Paper size Specify the size of paper for printing. p. 1-9
Input tray*
1
Specify the tray where paper for printing is loaded. p. 1-10
Paper type Specify the type of printing paper. p. 1-10
Output
Select the output method ([Print], [Save to folder], [USB memory save error] or
[Save as a file]) for original data sent from a computer.
p. 1-10
Destination When [Output] has been set to [Print & Save to folder] or [Save to folder], this
field indicates the directory.
p. 1-10
Save/Call setting Save and call frequently used settings. p. 1-11
[Layout] tab
Imposition Specify the type of imposition. p. 1-13
Rotate Specify this when rotating the original. p. 1-14
Image position Specify this when adjusting the print position. p. 1-14
Save/Call setting
Save and call frequently used settings. p. 1-14
[Image] tab
Original image*
3
Specify whether to emphasize the image quality of photos or text in originals. p. 1-15
Line smoothing Select this to smooth the outline of text or illustrations. p. 1-15
Envelope image
enhancement
Specify the image processing of envelope print. p. 1-15
Gamma control Adjust the lightness, chroma, contrast, and RGB gamma value. p. 1-16
Screening Specify the method of halftone processing. p. 1-16
Image quality Specify the print resolution. p. 1-17
Print density Specify the print density. p. 1-17
Barcode area definition Specify this to print a barcode. p. 1-17
Save/Call setting
Save and call frequently used settings. p. 1-19
[Finishing] tab
Collate Specify the collating option. p. 1-19
Slip sheet
*
1
Specify the timing for slip sheet insertion between printouts. p. 1-20
Offset output Specify the timing to offset output. (When using the optional multifunction
finisher, face down offset stapler, or high capacity stacker)
p. 1-20