Riso 9150 - Basic Settings; Color Mode

2-9
2
ComColor Series User’s Guide 09
Basic Settings
This section describes the copy functions that are configured with the [Basic] screen.
Color mode
Select color or monochrome printing.
[Auto]
Determine the color of the original automatically and
copies in color (cyan, magenta, yellow, and black) or
black and white.
[Full color]
Convert and copy the data into four colors (cyan,
magenta, yellow, and black).
[Black]
Copy in one color (black) regardless of the color of
the original.
[Cyan]
Copy in one color (cyan) regardless of the color of the
original.
[Magenta]
Copy in one color (magenta) regardless of the color of
the original.
● [Auto] and [Full color] cannot be selected when
the administrator has restricted color copying.
● [Cyan] is not available for ComColor 2150.
Also, [Red] is displayed instead of [Magenta];
[Dual-color] instead of [Full color].
1 Press [Color mode].
The [Color mode] screen is displayed.
2 Select the color mode.
3 Press [OK].
The settings are confirmed and the previous
screen is displayed.