Rockwell Automation Allen-Bradley FLEX 5000 User Manual

116 Rockwell Automation Publication 5094-UM001C-EN-P - April 2019
Chapter 7 Configure and Replace Safety Modules
You must configure each point to use it in a Safety application. The inputs are
disabled by default.
For more information on input delay times, see page 77
.
Test Output Points Category
The Test Output Points category is only available if you choose This Controller
for the Configured By parameter on the Module Definition dialog box.
You must configure each point to use it in a safety application. The outputs are
disabled by default.
Need to add artwork.

Rockwell Automation Allen-Bradley FLEX 5000 Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley FLEX 5000
Category	Control Unit
Language	English