Rockwell Automation Publication 5094-UM001C-EN-P - April 2019 15
Chapter 1
Digital I/O Module Operation
in a Logix 5000 Control System
Topic Page
Controller and Software Compatibility 17
Before You Begin 25
Secure Access to the System 19
Types of Modules 19
Module Overview 20
Ownership 22
Construct a 5094 FLEX 5000 I/O System 24
Configuration via Logix Designer Application 25
Connections for Standard I/O Modules 26
Connections for Safety I/O Modules 28
Connection Over an EtherNet/IP Network 32
Input Module Operation 32
Output Module Operation 33
Listen Only Mode 35
Protected Operations 36
Considerations Specific to Safety Modules 36
Use with Safety Controllers 37
IMPORTANT You cannot use FLEX 5000™ I/O modules with all Logix 5000™ controllers.
For example, you can use FLEX 5000 I/O modules with CompactLogix™ 5380
and ControlLogix® 5580 controllers but not with CompactLogix 5370 and
ControlLogix 5570 controllers.
You can use FLEX 5000 I/O modules with Logix 5000 controllers as
remote I/O modules only.
Throughout this publication, the term Logix 5000 controller refers to the
controllers with which you can use FLEX 5000 I/O modules in a given
capacity. The term does not refer to all Logix 5000 controllers.
For the most current information on the Logix 5000 controllers with which
you can use FLEX 5000 I/O modules, see the product description
at http://www.ab.com
.
To Next Page
Loading...
Need help?
General
