Rockwell Automation Allen-Bradley Kinetix 5500

Rockwell Automation Publication 2198-UM001M-EN-P - November 2022 123
Chapter 6 Configure and Start the Kinetix 5500 Drive System
The Motion Axis Parameters dialog box appears.
7. From the Parameter Group pull-down menu, choose Frequency Control.
8. Set the FluxUp, SkipSpeed, VelocityDroop, and CurrentVectorLimit
attributes appropriate for your application.
See the corresponding section in Appendix D
for information and
configuration examples regarding all of these topics.
9. Click OK.