Remote Control Basics
R&S
®
SMC100A
203Operating Manual 1411.4060.32 ─ 09
6. Select "VXI-11" and "Find Resources".
R&S VISA scans the network for connected instruments and lists all detected instu-
ments in the "Resource" list.
Note: The search may take some time, particularly in large networks.
7. Select the required instrument and confirm with "Select".
The "Find and select resource" dialog closes and R&S VISA indicates the instru-
ments IP address in the "Resource" field of the main application window.
8. As an alternative to the IP address, you can assign an alias name to the
R&S SMC:
a) In the menu bar, select "RsVisaConfig".
b) In the toolbar, select "+" to access the "VISA Rexource String Composer".
Starting a Remote Control Session
To Next Page
Loading...
