Rohde & Schwarz SMC100A - OUTPut Subsystem

Remote Control Commands
R&S
®
SMC100A
250Operating Manual 1411.4060.32 ─ 09
Usage: Event
Manual operation: See " Save " on page 110
:HCOPy:FILE[:NAME] <Name>
Creates/selects a file into which the hardcopy is stored.
The path is specified together with the filename. Access to the file via remote control is
possible using the commands of the MMEM subsystem. In contrast, command
HCOPy:DATA? transfers the hardcopy contents directly to the remote client where they
can be further processed.
If automatic file naming is activated, the hardcopy is stored into a file with an automati-
cally generated name (commands HCOPY:FILE[:NAME]:AUTO:…).
Parameters:
<Name> string
Example:
HCOP:FILE:NAME '/usb/HCopy'
Defines the hardcopy filename.
Manual operation: See "File Info" on page 108
:HCOPy:FILE[:NAME]:AUTO?
Queries the path including the filename of the file with automatically generated name.
Return values:
<Auto> string
Example: See :HCOPy:FILE[:NAME]:AUTO:FILE? on page 251
Usage: Query only
Manual operation: See " File Options " on page 108
:HCOPy:FILE[:NAME]:AUTO:DIRectory <Directory>
Sets the directory into which the hardcopy files are stored if auto naming is activated
(HCOP:FILE:AUTO:STAT ON).The directory is created if it does not exist yet.
Parameters:
<Directory> string
*RST: .\HCopy
Example:
HCOP:FILE:AUTO:DIR '/usb/'
Defines the destination directory '/usb/'
Manual operation: See " File Options " on page 108
HCOPy Subsystem