Preparing for Use
R&S
®
SMC100A
39Operating Manual 1411.4060.32 ─ 09
To remote access the instrument via a web browser:
1. Connect the instrument and the remote computer to a LAN, see Chapter 2.6.1,
"Connecting the Instrument to the Network", on page 34.
2. Instal the Java Runtime Environment JRE on the remote computer.
3. Type the instruments' IP address in the address field of the Web browser on your
PC, e.g. http://10.111.11.1
The "VNC Authentication" screen appears.
4. Enter the password and select "OK".
The default password is "instrument".
After the connection is established, the current signal generator screen with the
block diagram is displayed and the instrument can be remote-accessed from the
remote computer.
2.7.2 Remote Access via a VNC Client Software
A VNC client software is an application which can be used to access and control the
instrument from a remote computer via LAN.
The following description explains how to establish the remote access, represented by
means of the client software Ultr@VNC. The software is included in Linux/Unix operat-
ing system, but it is also available as a free-of-charge download on the Internet http://
www.uvnc.com/download/index.html. Thus, it is also available for remote computers
with Windows operating system.
The GUI appearance of Ultr@VNC may vary if you use a later release. Also, similar
programs may deviate in some details, but the basic procedure is the same.
Remote Access via an External Controller
To Next Page
Loading...
