Rohde & Schwarz SMC100A - Remote Control Commands

Remote Control Commands
R&S
®
SMC100A
258Operating Manual 1411.4060.32 ─ 09
MMEM:CDIR '/var/user/'*SAV 4
MMEM:STOR:STAT 4,"test.savrcltxt"
4. Load the file test.savrcltxt in the user directory.
MMEM:LOAD:STAT 4,'/var/user/test.savrcltxt'
5. Activate the instrument setting of the file test.savrcltxt.
*RCL 4
Working with Files and Directories
1. Read out all files in the specified directory.
MMEM:CAT? '/usb/user'
Response: 127145265,175325184,"test,DIR,0","temp,DIR,0",
"readme.txt,ASC,1324","state.savrcltxt,STAT,5327",
"waveform.wv,BIN,2342"
the directory /usb/user contains the subdirectories test and temp as well as
the files readme.txt, state.savrcltxt and waveform.wv which have differ-
ent file types.
Tip: To query only the subdirectories of the current or specified directory, perform:
MMEM:DCAT? '/usb/user'
Response: 'test', 'temp'
To query only the number of subdirectories in the current or specified directory,
perform:
MMEM:DCAT:LENG? '/usb/user'
Response: 2
2. To query the number of files in the current or specified directory, perform:
MMEM:CAT:LENG? '/usb/user'
Response: 3
3. Create a new subdirectory for mass memory storage in the specified directory.
MMEM:MDIR '/usb/new'
4. Copy the file state to a new file.
MMEM:COPY '/var/user/state.savrcltxt','/usb/new'
5. Rename the file state.
MMEM:MOVE 'state.savrcltxt','state_new.savrcltxt'
6. Remove the test directory.
MMEM:RDIR '/usb/test'
7.10.4 Remote Control Commands
:MMEMory:CATalog?..................................................................................................... 259
:MMEMory:CATalog:LENGth?.........................................................................................259
:MMEMory:CDIRectory...................................................................................................260
MMEMory Subsystem