Remote Control Basics
R&S
®
SMC100A
224Operating Manual 1411.4060.32 ─ 09
Figure 6-1: Graphical overview of the status registers hierarchy
OPER = Operation Status Summary Bit
RQS/MSS = Service Request Generation
ESB = Standard Event Status Summary Bit
MAV = Message Available in Output Queue
QUES = Questionable Status Summary Bit
2 = Error- /Event-Queue
1, 0 = not used
Note: This legend explains the abbreviations to the Status Byte Register.
The R&S SMC uses the following status registers:
●
Status Byte (STB) and Service Request Enable (SRE), see Chapter 6.5.3, "Sta-
tus Byte (STB) and Service Request Enable Register (SRE)", on page 227.
Status Reporting System
To Next Page
Loading...
