Getting Started
R&S
®
SMC100A
50Operating Manual 1411.4060.32 ─ 09
2. Select and activate AM modulation
a) Turn the rotary knob and select the "Modulation" block.
b) Press the rotary knob to open the dialog where the modulation can be selected.
The "Amplitude Mod..." menu is the first menu and is highlighted per default.
c) Turn the rotary knob and highlight "Amplitude Mod...".
Press the rotary knob to open the "Amplitude Modulation" dialog.
d) Turn the rotary knob to select parameter "AM Depth", press the rotary knob to
allow editing and enter the preferred AM depth with the aid of the numeric key-
pad and the unit keys.
e) Finally, select "State" and press the rotary knob to switch on the AM modula-
tion.
f) Press the DIAGRAM key to display the complete block diagram.
Example of Setup
To Next Page
Loading...
