SOURce:LIST SME
1038.6002.02 3.76 E-13
[:SOURce]:LIST:DWELl 1 ms to 1 s {, 1 ms to 1 s}
For every item of the FREQuency or POWer/VOLTage list contents, the command contains the
time the instrument "dwells" at this item.
Note: The RF generator is not in a position to allocate different times to the individual items
of the FREQuency and POWer list contents. Thus the DWELl part of the list should
have length 1; the value is then valid for all items. If a list containing more than one
element is indicated, all values must be equal.
Example: :SOUR:LIST:DWEL 0.15
[:SOURce]:LIST:DWELl:POINts?
The command queries the length (in items) of the DWELl-part of the list. The command is a query
and thus has no *RST value.
Example: :SOUR:LIST:DWEL:POIN? Answer: 1
[:SOURce]:LIST:FREE?
The command queries two values. The first one indicates the space still vacant for lists (in items),
the second one the space already occupied, also in items. The command is a query and thus has
no *RST value.
Example: :SOUR:LIST:FREE? Answer: 2400, 200
[:SOURce]:LIST:FREQuency 5 kHz to 1.5 GHz {, 5 kHz to 1.5 GHz}| block data
(SME03/06: 5 kHz to 3/6 GHz)
The command fills the FREQuency part of the list selected with data. The data can either be
indicated as a list of numbers (separated by commas) of arbitrary length or as binary block data.
In the case of block data transmission, always 8 (4) bytes are interpreted as a floating-point
number of double accuracy (cf. command FORMat :DATA). *RST does not influence data lists.
Example: :SOUR:LIST:FREQ 1.4GHz, 1.3GHz, 1.2GHz,...
[:SOURce]:LIST:FREQuency:POINts?
The command queries the length (in items) of the FREQuency part of the list presently selected.
The command is a query and thus has no *RST value.
Example: :SOUR:LIST:FREQ:POIN? Answer: 327
[:SOURce]:LIST:LEARn
The command learns the list selected. I.e., it determines the hardware setting for the entire list.
The data thus determined are stored together with the list. The command triggers an event and
thus has no *RST value.
Example: :SOUR:LIST:LEAR
Caution: This command has to be given after every creating and changing of a list.
To Next Page
Loading...
