Rohde & Schwarz SME02 - Page 432

List of Commands SME
1038.6002.02 8C.2 E-12
Command
Parameter
SCPI
info
Page
:DIAGnostic:INFO:MODules? 3.22
:DIAGnostic:INFO:OTIMe? 3.22
:DIAGnostic:INFO:SDATe? 3.22
:DIAGnostic[:MEASure]:POINt? 3.22
:DIAGnostic:XMEM:CHECksum:ATTenuate? not-SCPI 3.23
:DIAGnostic:XMEM:CHECksum:BURSt? not-SCPI 3.23
:DIAGnostic:XMEM:CHECksum:CALCulate not-SCPI 3.22
:DIAGnostic:XMEM:CHECksum:DATA? not-SCPI 3.23
:DIAGnostic:XMEM:CHECksum[:TOTal]? not-SCPI 3.23
:DISPlay:ANNotation[:ALL] ON | OFF 3.24
:DISPlay:ANNotation:AMPLitude ON | OFF 3.24
:DISPlay:ANNotation:FREQuency ON | OFF 3.24
:FORMat:BORDer NORMal | SWAPped 3.25
:FORMat:DATA ASCii | PACKed 3.25
:MEMory:NSTates? 3.26
:OUTPut:AMODe AUTO | FIXed not-SCPI 3.26
:OUTPut:BLANk:POLarity NORMal | INVerted not-SCPI 3.27
:OUTPut:IMPedance? 3.27
:OUTPut:PROTection:CLEar 3.27
:OUTPut:PROTection:TRIPped? 3.27
:OUTPut[:STATe] ON | OFF 3.27
:OUTPut[:STATe]:PON OFF | UNCHanged not-SCPI 3.27
:OUTPut2:SOURce 0 | 2 not-SCPI 3.28
:OUTPut2:SOURce:STEReo MPX | PILot not-SCPI 3.28
:OUTPut2[:STATe] ON | OFF 3.28
:OUTPut2:VOLTage 0 V to 4 V not-SCPI 3.28
[:SOURce]:AM[:DEPTh] 0 to 100 PCT 3.30
[:SOURce]:AM:EXTernal:COUPling AC | DC 3.30