Rohde & Schwarz SME02 - Page 435

SME List of Commands
1038.6002.02 8C.5 E-12
Command
Parameter
SCPI
info
Page
[:SOURce]:DM:QPSK:BRATe 1 to 24.3 kb/s and 27.0 to 48.6 kb/s not-SCPI 3.45
[:SOURce]:DM:QPSK:CODing NADC | PDC | TFTS | TETRa | APCO |
MSAT | INMarsat
not-SCPI 3.45
[:SOURce]:DM:QPSK:FILTer COSine|SCOSine , 0.35|0.4|0.5|0.6 |
COSine, 0.2
not-SCPI 3.46
[:SOURce]:DM:QPSK:POLarity NORMal | INVerted not-SCPI 3.46
[:SOURce]:DM:FSK:STANdard POCSag512| POCSag1200|
POCSag2400| CITYruf512|
CITYruf1200| CITYruf2400 | FLEX1600 |
FLEX3200
not-SCPI 3.46
[:SOURce]:DM:FSK:BRATe 0.05 to 1900 kb/s (with FILTer OFF),
0.05 to 90 kb/s (with FILTer switched on)
not-SCPI 3.47
[:SOURce]:DM:FSK:DEViation 0 to 400 kHz not-SCPI 3.47
[:SOURce]:DM:FSK:FILTer GAUSs, 2.73 | BESSel, 1.22 |
BESSel, 2.44 | OFF
not-SCPI 3.47
[:SOURce]:DM:FSK:POLarity NORMal | INVerted not-SCPI 3.47
[:SOURce]:DM:FSK4:STANdard ERMes | APCO | MODacom | FLEX3200
| FLEX6400
not-SCPI 3.47
[:SOURce]:DM:FSK4:BRATe 1 to 24.3 kb/s | 27.0 to 48.6 kb/s not-SCPI 3.48
[:SOURce]:DM:FSK4:CODing ERMes | APCO | MODacom | FLEX not-SCPI 3.48
[:SOURce]:DM:FSK4:DEViation 0.01 to 400 kHz not-SCPI 3.48
[:SOURce]:DM:FSK4:FILTer BESSel, 1.22|1.25|2.44 | COS|SCOS,
0.2
not-SCPI 3.48
[:SOURce]:DM:FSK4:POLarity NORMal | INVerted not-SCPI 3.48
[:SOURce]:DM:FFSK:STANdard POCSag not-SCPI 3.48
[:SOURce]:DM:FFSK:BRATe 0.05 to 90 kb/s not-SCPI 3.48
[:SOURce]:DM:FFSK[:DEViation] 1.5 kHz | 2.0 kHz | 3.0 kHz | 3.5 kHz |
4.0 kHz | 4.5 kHz
not-SCPI 3.48
[:SOURce]:ERMes:CHANnel 0 to 15 not-SCPI 3.50
[:SOURce]:ERMes:ERRor:BATCh A to P {,A to P} not-SCPI 3.50
[:SOURce]:ERMes:ERRor:MASK 0 to 1073741823 not-SCPI 3.50
[:SOURce]:ERMes:ERRor:WORD 0 to 153 (0 to 189 for long batch) not-SCPI 3.50
[:SOURce]:ERMes:MESSage:ALPHanumeric:DATA ’String’ not-SCPI 3.51
[:SOURce]:ERMes:MESSage:ALPHanumeric[:SELect] ²FOX | ALPHA | USER1 to 4" 3.51