Rohde & Schwarz SME02 - Page 436

List of Commands SME
1038.6002.02 8C.6 E-12
Command
Parameter
SCPI
info
Page
[:SOURce]:ERMes:MESSage:CATegory ALPHanumeric | NUMeric | TONE not-SCPI 3.51
[:SOURce]:ERMes:MESSage:IA | IADDress 0 to 262143 not-SCPI 3.51
[:SOURce]:ERMes:MESSage:NUMeric ’ String’ not-SCPI 3.51
[:SOURce]:ERMes:MESSage:TONE 0 to 15 not-SCPI 3.52
[:SOURce]:ERMes:NINFormation:OPERator 0 to 7 not-SCPI 3.52
[:SOURce]:ERMes:NINFormation:PA | PARea 0 to 63 not-SCPI 3.52
[:SOURce]:ERMes:NINFormation:ZCOuntry 0 to 799 not-SCPI 3.52
[:SOURce]:ERMes:SEQuence:DBATch A to P not-SCPI 3.52
[:SOURce]:ERMes:SI|SINFormation:BAI ON | OFF not-SCPI 3.52
[:SOURce]:ERMes:SI|SINFormation:DOMonth 1 to 31 not-SCPI 3.53
[:SOURce]:ERMes:SI|SINFormation:ETI ON | OFF not-SCPI 3.53
[:SOURce]:ERMes:SI|SINFormation:FSI 0 to 30 not-SCPI 3.53
[:SOURce]:ERMes:SI|SINFormation:TIME 00.00 to 23.59 not-SCPI 3.53
[:SOURce]:ERMes:STATe ON | OFF not-SCPI 3.49
[:SOURce]:ERMes:STATe:AUTO ON | OFF not-SCPI 3.50
[:SOURce]:ERMes:TACTion MESSage | STARt | ONCE not-SCPI 3.53
[:SOURce]:FLEX:CYCLe 0 to 14 not-SCPI 3.55
[:SOURce]:FLEX:DEViation 2.0 to 10.0 kHz not-SCPI 3.55
[:SOURce]:FLEX:ERRor:MASK 0 to 4294967295 not-SCPI 3.55
[:SOURce]:FLEX:ERRor:WORD 0 to 87 not-SCPI 3.55
[:SOURce]:FLEX:FCONtent ’X | blank spaces | O | A [,X| blank
spaces | O | A ]’
not-SCPI 3.56
[:SOURce]:FLEX:FCONtent:AUTO ON | OFF not-SCPI 3.56
[:SOURce]:FLEX:MESSage:ALPHanumeric:CATalog? not-SCPI 3.58
[:SOURce]:FLEX:MESSage:ALPHanumeric:DATA ’String’ not-SCPI 3.58
[:SOURce]:FLEX:MESSage:ALPHanumeric[:SELect] ’FOX’ | ’ALPHA’ | ’USER1’ | ’USER2’ |
’USER3’ | ’USER4’
not-SCPI 3.57
[:SOURce]:FLEX:MESSage:BINary:BLENgth 1 to 16 not-SCPI 3.58
[:SOURce]:FLEX:MESSage:BINary:CATalog? not-SCPI 3.58
[:SOURce]:FLEX:MESSage:BINary:DATA ’0 | 1 [,0 | 1]’ not-SCPI 3.58