Rohde & Schwarz SME02 - Page 438

List of Commands SME
1038.6002.02 8C.8 E-12
Command
Parameter
SCPI
info
Page
[:SOURce]:FREQuency:CENTer 5 kHz to1.5 GHz
(SME03E/03/06: 5 kHz to 2.2/3/6 GHz)
3.63
[:SOURce]:FREQuency:MANual 5 kHz to 1.5 GHz
(SME03E/03/06: 5 kHz to 2.2/3/6 GHz)
3.64
[:SOURce]:FREQuency:MODE CW | FIXed | SWEep | LIST 3.64
[:SOURce]:FREQuency:OFFSet -50 to +50 GHz 3.64
[:SOURce]:FREQuency:SPAN 0 to 1.5 GHz
(SME03E/03/06: 5 kHz to 2.2/3/6 GHz)
3.64
[:SOURce]:FREQuency:STARt 5 kHz to 1.5 GHz
(SME03E/03/06: 5 kHz to 2.2/3/6 GHz)
3.64
[:SOURce]:FREQuency:STEP[:INCRement] 0 to 1 GHz 3.65
[:SOURce]:FREQuency:STOP 5 kHz to 1.5 GHz
(SME03E/03/06: 5 kHz to 2.2/3/6 GHz)
3.65
[:SOURce]:FREQuency[:CW|:FIXed] 5 kHz to1.5 GHz
(SME03E/03/06: 5 kHz to 2.2/3/6 GHz)
3.63
[:SOURce]:FREQuency[:CW|:FIXed]:RCL INCLude | EXCLude 3.63
[:SOURce]:ILS:STATe ON | OFF not-SCPI 3.67
[:SOURce]:ILS:SOURce INT2 | INT2, EXT not-SCPI 3.67
[:SOURce]:ILS:TYPE GS|GSLope | LOCalize not-SCPI 3.67
[:SOURce]:ILS[:GS|GSLope]:COMid:DEPTh 0 to 100 PCT not-SCPI 3.68
[:SOURce]:ILS[:GS|GSLope]:COMid:FREQuency 0.1 to 20 000 Hz not-SCPI 3.68
[:SOURce]:ILS[:GS|GSLope]:COMid[:STATe] ON | OFF not-SCPI 3.68
[:SOURce]:ILS[:GS|GSLope]:DDM:CURRent - 685 uA to + 685 uA not-SCPI 3.68
[:SOURce]:ILS[:GS|GSLope]:DDM:DIRection UP | DOWN not-SCPI 3.68
[:SOURce]:ILS[:GS|GSLope]:DDM:LOGarithmic] - 999.9 dB to + 999.9 dB not-SCPI 3.68
[:SOURce]:ILS[:GS|GSLope]:DDM[:DEPTh] - 0.8 to+ 0.8 not-SCPI 3.68
[:SOURce]:ILS[:GS|GSLope]:LLOBe[:FREQuency] 100 to 200 Hz not-SCPI 3.69
[:SOURce]:ILS[:GS|GSLope]:MODE NORM | ULOBe | LLOBe not-SCPI 3.67
[:SOURce]:ILS[:GS|GSLOpe]:PHASe 0 to 120 deg not-SCPI 3.69
[:SOURce]:ILS[:GS|GSLope]:PRESet not-SCPI 3.69
[:SOURce]:ILS[:GS|GSLope]:SODepth 0 to 100 PCT not-SCPI 3.69
[:SOURce]:ILS[:GS|GSLope]:ULOBe[:FREQuency] 60 to 120 Hz not-SCPI 3.69