Rohde & Schwarz SME02 - Page 439

SME List of Commands
1038.6002.02 8C.9 E-12
Command
Parameter
SCPI
info
Page
[:SOURce]:ILS:LOCalizer:COMid:DEPTh 0 to 100 PCT not-SCPI 3.70
[:SOURce]:ILS:LOCalizer:COMid:FREQuency 0.1 to 20 000 Hz not-SCPI 3.70
[:SOURce]:ILS:LOCalizer:COMid[:STATe] ON | OFF not-SCPI 3.70
[:SOURce]:ILS:LOCalizer:DDM:CURRENT -387 to +387 uA not-SCPI 3.71
[:SOURce]:ILS:LOCalizer:DDM:DIRection LEFT | RIGHt not-SCPI 3.71
[:SOURce]:ILS:LOCalizer:DDM:LOGarithmic -999.9 dB to +999.9 dB not-SCPI 3.71
[:SOURce]:ILS:LOCalizer:DDM[:DEPTh] -0.4 to +0.4 not-SCPI 3.71
[:SOURce]:ILS:LOCalizer:LLOBe[:FREQuency] 60 to 120 Hz not-SCPI 3.71
[:SOURce]:ILS:LOCalizer:MODE NORM | LLOBe | RLOBe not-SCPI 3.70
[:SOURce]:ILS:LOCalizer:PHASe 0 to 120 deg not-SCPI 3.72
[:SOURce]:ILS:LOCalizer:PRESet not-SCPI 3.72
[:SOURce]:ILS:LOCalizer:RLOBe[:FREQuency] 100 to 200 Hz not-SCPI 3.72
[:SOURce]:ILS:LOCalizer:SODepth 0 to 100 PCT not-SCPI 3.72
[:SOURce]:LIST:CATalog? not-SCPI 3.73
[:SOURce]:LIST:DELete ‘Name of list’ not-SCPI 3.73
[:SOURce]:LIST:DELete:ALL not-SCPI 3.73
[:SOURce]:LIST:DWELl 1 ms to 1 s {, 1 ms to 1 s} 3.74
[:SOURce]:LIST:DWELl:POINts? 3.74
[:SOURce]:LIST:FREE? 3.74
[:SOURce]:LIST:FREQuency 5 kHz to1.5 GHz {, 5 kHz to1.5 GHz}|
block data (SME03/06: 5 kHz to3/6 GHz)
3.74
[:SOURce]:LIST:FREQuency:POINts? 3.74
[:SOURce]:LIST:LEARn not-SCPI 3.74
[:SOURce]:LIST:MODE AUTO | STEP not-SCPI 3.75
[:SOURce]:LIST:POWer -144 to16 dBm {, -144 to16 dBm} |
block data
3.75
[:SOURce]:LIST:POWer:POINts? 3.75
[:SOURce]:LIST:SELect ’Name of list’ not SCPI 3.75
[:SOURce]:[:FSWeep]:AMPLitude ON | OFF 3.76
[:SOURce]:[:FSWeep]:AOFF 3.76