Rohde & Schwarz SME02 - Page 440

List of Commands SME
1038.6002.02 8C.10 E-12
Command
Parameter
SCPI
info
Page
[:SOURce]:[:FSWeep]:FREQuency 5 kHz to 1.5 GHz
(SME03E/03/06: 5 kHz to F/3/6 GHz)
3.76
[:SOURce]:MARKer1|2|3[:FSWeep][:STATe] ON | OFF 3.77
[:SOURce]:MARKer1|2|3:PSWeep:AOFF not-SCPI 3.77
[:SOURce]:MARKer1|2|3:PSWeep:POWer -144 dBm to+16 dBm not-SCPI 3.77
[:SOURce]:MARKer1|2|3:PSWeep[:STATe] ON | OFF not-SCPI 3.77
[:SOURce]:MARKer1|2|3:POLarity NORMal | INVerted not-SCPI 3.77
[:SOURce]:MBEacon:COMid:DEPTh 0 to 100 PCT not-SCPI 3.78
[:SOURce]:MBEacon:COMid:FREQuency 0.1 to 20 000 Hz not-SCPI 3.78
[:SOURce]:MBEacon:COMid[:STATe] ON | OFF not-SCPI 3.78
[:SOURce]:MBEacon[:MARKer]:DEPTh 0 to 100 PCT not-SCPI 3.78
[:SOURce]:MBEacon[:MARKer]:FREQuency 400 Hz | 1300 Hz | 3000 Hz not-SCPI 3.78
[:SOURce]:MBEacon:STATe ON | OFF not-SCPI 3.78
[:SOURce]:PHASe[:ADJust] -360 deg to +360 deg not-SCPI 3.79
[:SOURce]:PHASe:REFerence not-SCPI 3.79
[:SOURce]:PM1|2[:DEViation] -360 to +360 deg 3.80
[:SOURce]:PM1|2:EXTernal1|2:COUPling AC | DC 3.80
[:SOURce]:PM1|2:INTernal:FREQuency 400 kHz | 1 kHz | 3 kHz | 15 kHz or
0.1 Hz to500 kHz or 0.1 Hz to1 MHz
3.81
[:SOURce]:PM1|2:SOURce INTernal | EXTernal1 | EXTernal2 3.81
[:SOURce]:PM1|2:STATe ON | OFF 3.81
[:SOURce]:POCSag:BRATe 512bps | 1200bps | 2400bps not-SCPI 3.83
[:SOURce]:POCSag:DEViation 1.5 | 2.0 | 3.0 | 3.5 | 4.0 | 4.5 kHz not-SCPI 3.83
[:SOURce]:POCSag:ERRor:MASK 0 to 4294967295 not-SCPI 3.83
[:SOURce]:POCSag:ERRor:WORD 0 to 16 not-SCPI 3.83
[:SOURce]:POCSag:LBATches 0 to 100 not-SCPI 3.83
[:SOURce]:POCSag:MESSage not-SCPI 3.83
[:SOURce]:POCSag:MESSage:ADDRess 0 to 209715 not-SCPI 3.83
[:SOURce]:POCSag:MESSage:ALPHanumeric:CATalog? not-SCPI 3.84
[:SOURce]:POCSag:MESSage:ALPHanumeric:DATA ’String’ not-SCPI 3.84