Rohde & Schwarz SME02 - Page 444

List of Commands SME
1038.6002.02 8C.14 E-12
Command
Parameter
SCPI
info
Page
[:SOURce]:VOR[:BANGle] 0 to 360 deg not-SCPI 3.105
[:SOURce]:VOR[:BANGle]:DIRection FROM | TO not-SCPI 3.105
[:SOURce]:VOR:COMid:DEPTh 0 to 100 PCT not-SCPI 3.106
[:SOURce]:VOR:COMid:FREQuency 0.1 to 20 000 Hz not-SCPI 3.106
[:SOURce]:VOR:COMid[:STATe] ON | OFF not-SCPI 3.106
[:SOURce]:VOR:MODE NORM | VAR | SUBCarrier not-SCPI 3.105
[:SOURce]:VOR:PRESet not-SCPI 3.106
[:SOURce]:VOR:REFerence[:DEViation] 0 to 960 Hz not-SCPI 3.106
[:SOURce]:VOR:SOURce INT2 | INT2, EXT not-SCPI 3.104
[:SOURce]:VOR:STATe ON | OFF not-SCPI 3.104
[:SOURce]:VOR:SUBCarrier:DEPTh 0 to 100 PCT not-SCPI 3.105
[:SOURce]:VOR:SUBCarrier[:FREQuency] 5 to 15 kHz not-SCPI 3.105
[:SOURce]:VOR:VAR:FREQuency 20 to 40 Hz not-SCPI 3.105
[:SOURce]:VOR:VAR[:DEPTh] 0 to 100 PCT not-SCPI 3.105
:SOURce0|2:FREQuency[:CW | :FIXed] 400 Hz | 1 kHz | 3 kHz | 15 kHz or
0.1 Hz to 500 kHz or 0.1 Hz to 1 MHz
3.108
:SOURce0|2:FREQuency:MANual 0.1 Hz to 500 kHz or 0.1 Hz to 1 MHz 3.108
:SOURce0|2:FREQuency:MODE CW | FIXed | SWEep 3.108
:SOURce0|2:FREQuency:STARt 0.1 Hz to 500 kHz or 0.1 Hz to 1 MHz 3.108
:SOURce0|2:FREQuency:STOP 0.1 Hz to 500 kHz or 0.1 Hz to 1 MHz 3.108
:SOURce0|2:FUNCtion[:SHAPe] SINusoid | SQUare | TRIangle | PRNoise
| SAWTooth
3.109
:SOURce2:MARKer1|2|3[:FSWeep]:FREQuency 0.1 Hz to 500 kHz 3.110
:SOURce2:MARKer1|2|3[:FSWeep]:AOFF 3.110
:SOURce2:MARKer1|2|3[:FSWeep][:STATe] ON | OFF 3.110
:SOURce2:MARKer1|2|3:POLarity NORMal | INVerted not-SCPI 3.110
:SOURce2:SWEep:BTIMe NORMal | LONG not-SCPI 3.111
:SOURce2:SWEep[:FREQuency]:DWELl 1 ms to 1 s not-SCPI 3.111
:SOURce2:SWEep[:FREQuency]:MODE AUTO | MANual | STEP not-SCPI 3.111