Saving a Tone/Pattern (WRITE MENU)
74
4.
Turn the [1] and [2] knobs to input the tone name, and press the [ENTER] button to confirm.
5.
Press [ENTER] again on the dialog box screen.
This saves the tone.
Saving the Pattern
* When you edit the settings of a pattern, the icon appears on the PATTERN screen, and the EDITED icon appears on the
WRITE MENU screen.
1.
Hold down the [SHIFT] button and press the [PAGE/TIE] button.
The WRITE MENU screen appears.
2.
Turn the [1] knob to select “PATTERN”, and then press the [ENTER] button.
If you select “PATTERN” and save, the tones assigned to that pattern are reset to the tones that you last saved.
3.
Turn the [1] knob to select the save-destination pattern number, and then press the [ENTER] button.
4.
Turn the [1] and [2] knobs to input the pattern name, and press the [ENTER] button to confirm.
5.
Press [ENTER] again on the dialog box screen.
This saves the pattern.
To Next Page
Loading...
