Saving a Tone/Pattern (WRITE MENU)
75
Saving the Pattern and Tones
1.
Hold down the [SHIFT] button and press the [PAGE/TIE] button.
The WRITE MENU screen appears.
2.
Turn the [1] knob to select “PATTERN & TONE” or “OVERWRITE”, and press the [ENTER] button.
If the tone to save is a user tone and you select “OVERWRITE”, the tone name input is skipped and the tone is saved with the
current tone number and name.
3.
Turn the [1] knob to select the save destination number for the tone or pattern to save, and then press
the [ENTER] button.
4.
Turn the [1] and [2] knobs to input the name of the tone or pattern to save, and press the [ENTER]
button to confirm.
5.
Press [ENTER] again on the dialog box screen.
This saves the pattern.
To Next Page
Loading...
