Ropex CIRUS UPT-6400 - Overview

Description of project | 4
VERSION 1 | EN-US CIRUS
®
UPT-6400 Page 13 of 104
A timer integrated into the temperature controller allows the complete sealing process
of simple machines such as tabletop sealing devices to be controlled. Three config-
urable switch outputs can be used to trigger motors, magnets, etc.
The process data is shown on a color screen.
The language of the display can be changed.
The actual temperature of the heating element is shown in the display as a digital
value in°C. A progress bar shows the actual temperature as a graph.
In addition, the actual temperature of the heating element is output via an electrically
isolated analog output 0…10 VDC. This means that the actual temperature of the
heating element can be displayed on an external instrument (e.g.ATR-x).
The temperature controller CIRUS
®
UPT-6400 also has an integrated error diagnosis
feature that monitors the external system (e.g. heating element, wiring, etc.) as well as
the internal electronics and, in the event of malfunction, issues a differentiated error
message.
To improve operational safety and immunity to interference, all of the 24VDC logic
signals are electrically isolated from the heating circuit.
Adjustments to suit the heating elements and selection of the temperature range (0…
300 °C, 0…500 °C, etc.) can be made in the temperature controller menu.
The temperature controller CIRUS
®
UPT-6400 is intended to be mounted in a cut-out
of the control panel. The compact design of the device along with the plug-in terminals
make installation easier.
4.4 Overview
21
5
3
4
1
Screen
2
Operating buttons
3
Terminal diagram
4
ID plate
5
Fixing hook