9 | Restarting after changing the heating element
Page 82 of 104 CIRUS
®
UPT-6400 VERSION 1 | EN-US
9 Restarting after changing the heating element
NOTICE
Damage to heating element caused by overheating
Using unsuitable heating elements (dimensions, temperature coefficient) will cause
the heating element to overheat and malfunction.
Select the correct dimensions and temperature coefficients.
When the heating element has been replaced, the temperature controller has to be
started up again and the function AUTOCAL performed. Details can be found in sec-
tion Startup [}27].
To Next Page
Loading...
