EU Declaration of Conformity
The Manufacturer
ROPEX Industrie-Elektronik GmbH
Adolf-Heim-Str. 4
74321 Bietigheim-Bissingen
Germany
hereby declare that the following product
Designation CIRUS
®
temperature controller
Type UPT-6400 Article number 7640040
Operating principle Impulse sealing of films and plastics
is in conformity with the provisions of the following EU directives (inclusive amendments)
• 2014/30/EU Electromagnetic Compatibility Directive (EMC Directive)
• 2014/35/EU Directive on electrical equipment designed for use within certain voltage limits (Low Voltage
Directive)
• 2011/65/EU Directive on the use of certain hazardous substances in electrical and electronic equipment
(RoHS Directive)
References of standards for this declaration of conformity, or parts thereof:
Harmonized standards of Europe:
• Safety
◦ EN 61010-1:2010+A1:2019 / IEC 61010-1:2010+A1:2016
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1:
General requirements
◦ EN IEC 61010-2-030:2021 / IEC 61010-2-030:2017
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030:
Particular requirements for equipment having testing or measuring circuits
• Electromagnetic compatibility
◦ EN IEC 61000-6-2:2019
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial en-
vironments
(Immunity: Severity level industrial)
◦ EN IEC 61000-6-4:2019
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial en-
vironments
(Emission: Limit class A)
• Restriction of hazardous substances
◦ EN IEC 63000:2018
Technical documentation for the assessment of electrical and electronic products with respect to the re-
striction of hazardous substances
Note
This declaration of conformity certifies that the product itself complies with the above-mentioned directives.
The CE mark on the product does not relieve the machinery manufacturer of his duty to verify the conformity of
the completely installed, wired and operationally ready system in the machine with the EMC directive.
W900312 | 03/2024 | en-US Page 1 of 2
To Next Page