2 | Intended use
Page 8 of 104 CIRUS
®
UPT-6400 VERSION 1 | EN-US
2 Intended use
The device has been designed and tested in accordance with the latest state of tech-
nology. To prevent personal injury as well as damage to equipment, use the device
properly and only as intended.
The temperature controller regulates the temperature of heating elements used to seal
and cut thermoplastic films.
The temperature controller may be operated only with suitable adhesives in a proper
and complete control loop.
The device may be used only when it is completely assembled and is functioning as
intended. The device may never be opened, repaired or modified in any way.
The device is developed, designed and built for industrial and commercial use only.
Personal use, e.g. in private households, is prohibited.
The device is intended to be used only by persons with the following knowledge and
skills:
• Qualified technicians who, based on their professional training or experience, are
familiar with pulse sealing.
Any other use besides the intended use is prohibited. The manufacturer will not be li-
able for damage resulting from unintended use. When any changes are made to the
product, including in the course of assembly and installation, all warranty claims will be
forfeited.
Consult all instructions and follow them carefully whenever working on the device.
2.1 Ambient conditions
Ambient conditions Limits
Altitude Up to 2000m
Ambient temperature +5…+45°C
Maximum relative
humidity
80% at temperatures up to +31°C
decreasing linearly to 50% relative humidity at +45°C
To Next Page
Loading...
