DK00023.fm
REPAIR MANUAL
BRP-Powertrain
Effectivity: 125 MAX DD2
Edition 2 / Rev. 0
Chapter 1
Page 7
September 01/2011
3) Safety notice
General note Although the reading of such information does not eliminate the hazard,
understanding the information will promote its correct use. Always use
common workshop safety practice.
The information and components-/system descriptions contained in this
Manual are correct at the time of publication. BRP-Powertrain, however,
maintains a policy of continuous improvement of its products without
imposing upon itself any obligation to install them on its products previ-
ously manufactured.
Revision BRP-Powertrain reserves the right at any time, and without incurring obli-
gation, to remove, replace or discontinue any design, specification, fea-
ture or otherwise.
Measure Specifications are given in the SI metric system with the USA equivalent
in parenthesis.
Symbols used This Manual uses the following symbols to emphasize particular informa-
tion. This information is important and must be observed.
NOTES: Indicates supplementary information which may be
needed to fully complete or understand an instruc-
tion.
A revision bar outside of the page margin indicates a
change to text or graphic.
Identifies an instruction which, if not followed,
may cause serious injury including the possibility
of death.
Identifies an instruction which, if not followed,
may cause minor or moderate injury.
Denotes an instruction which, if not followed,
may severely damage the engine or other compo-
nent.
To Next Page
Loading...
Need help?
General
