DK00026.fm
REPAIR MANUAL
BRP-Powertrain
Effectivity: 125 MAX/125 Junior MAX/125 Mini
MAX/125 Micro MAX
Edition 2 / Rev. 0
Chapter 4
Page 37
December 01/2010
4.9) Installation of the spark plug
General NOTES: The following spark plugs are approved by
BRP-Powertrain:
Denso IW 24-31, Denso IW 27 is installed as standard.
Instructions Proceed as follows to install the spark plug:
Step Procedure
1 Screw in spark plug hand-tight and use tightening torque 27 Nm (20 ft.lb).
To Next Page
Loading...
