DK00023.fm
REPAIR MANUAL
BRP-Powertrain
Effectivity: 125 MAX DD2
Edition 2 / Rev. 0
Chapter 1
Page 9
September 01/2011
Locking devices
Locking devices (e.g. locking tab, self-locking fasteners, etc. ) must be
installed or replaced with new ones, where specified. If the efficiency of a
locking device is impaired, it must be replaced.
Torque wrench
tightening
Torque wrench tightening specifications must be strictly adhered to.
If not specified otherwise, the threads are not lubricat-
ed when fastened.
To Next Page
Loading...
