Sam4s ER-260EJ - PLU Programming Procedures

Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 111
PLU Programming
To accommodate UPC scanning, each PLU can be given an identifying number up to 14 digits in
length.
1. Move the key to the P lock position to display the Program Mode menu.
2. With the first option, “PLU” displayed, Press CASH.
PLU
1.ADD/CHANGE
3. There are four PLU programming options:
1.ADD/CHANGE
2.DELETE
3.PLU STOCK
4.NLU CODE# PGM
4. Use the CHARGE1 and the CHARGE2 keys to scroll up and down through the
PLU menu. Or, if you already know the menu number of the PLU function you with
to perform, you can enter the digit (1-4) directly.