Sam4s ER-260EJ - Saving Reports

Sam4s ER-260EJ/256EJ OP Manual v1.20 Service Mode Programming • 97
Saving Reports
After selecting ‘REPORT SAVE’, you will be given the option to save in ‘CSV’ or ‘REPORT’ format.
Reports saved are the current X1 readings.
The ER-260EJ/ER-265EJ will write the program files to folder. For example:
ER-260EJ/ER-265EJ/STORENAME/SALEBACK/CSVBACK/DATE/TIME or
ER-260EJ/ER-265EJ/STORENAME/SALEBACK/REPBACK/DATE/TIME
The date folder depends on date format option. See "SYSTEM" of "Options Programming" in the
"Program Mode Programming" chapter to set DATE FORMAT.
DATE FORMAT DATE FOLDER NAME
YYMMDD 20140403
DDMMYY 03042014
MMDDYY 04032014
Each individual report is named with the time of the report. For example: “CLK02332” represents a
Clerk report taken at 23:32 (in a 24-hour time format.) In this manner, multiple reports backed up at
different times in the same day will collect in the same “date” folder.
Below is an Explorer view of the backed-up files. In the example below, the store name is “SAM4S”
and the format is CSV.