Sam4s ER-260EJ - Options - Reference Information

142 • Program Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
Options - Reference Information
SYSTEM Options
Option Entry Description
1 BEEPER ACTIVE Y or N Select N for a silent keyboard.
2 CLERK ENTRY PUSH,
CODE
Select PUSH for a push button clerk, select CODE for a
code entry clerk system (number - clerk or clerk - number
- clerk) sequence.
3 CLERK IS STAY DOWN,
POP-UP
Select Y for pop-up clerks, select N for stay down clerks.
With pop-
up clerks, you must sign on for each transaction.
With stay down clerks, the same clerk remains signed on
until sign off.
4 DECIMAL PLACE 0-3
Enter a digit to place the decimal point the selected
number of positions from the right.
5 DATE FORMAT IS MMDDYY,
DDMMYY,
YYMMDD
Select date printing format.
6 DESC. PGM METHOD OVERLAY,
CODE
When OVERLAY TYPE, program descriptors by pressing
the appropriate key on the program overlay. When CODE
TYPE, program descriptors by typing the code for each
descriptor character.
7
DRAWER MUST BE
SHUT TO SALE
Y or N Select Y to enforce closed drawer for register operations.
8
ACTIVATE OPEN
DRAWER ALARM
Y or N
Select Y if you want the error tone to automatically sound
when the drawer stays open longer than the time set in the
following field.
9
DRAWER OPEN TIME (0-
99)
0-99
If you enable the open drawer alarm above, you can set
the length of time (1-99 seconds) before the alarm sounds.
10 ALLOW POST TENDER Y or N
Select Y to allow re-tendering should a second change
calculation be necessary. Re-enter the tendered amount
and press the CASH key to show the new change
computation.
11
OPEN DRAWER ON
POST TENDER
Y or N
If you enable post tendering, select N to not open the cash
drawer after the second tender.
12
GLOBAL ENTRY LIMIT
(0-14)
0-14
Enter a digit to determine the number of numeric digits
that can be entered for any register function. Enter 0 for
no limit.
13
ALLOW MULPTIPLE
RECEIPT
Y or N
Set to Y if you wish to issue more than one copy of a
transaction receipt.
14
DEACTIVATE SPLIT
PRICING
Y or N
If N, both multiplication and split pricing calculations can
be done with the X/TIME key. If Y, only multiplication
can be done with the X/TIME key.