Sam4s ER-260EJ - Function Key Programming

Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 121
Function Key Programming
1. Move the key to the P lock position to display the Program Mode menu.
2. Press the CHARGE1 twice to select “3.FUNCTION KEY” and press CASH or
press 3 and CASH to display the FUNCTION KEY screen.
FUNCTION KEY
1.FUNCTION KEY
3. Press 1 and CASH to select FUNCTION KEY menu.
ENTER FUNC.KEY
TO BE PROGRAMMED
4. Press the function key you wish to program. For example: Press the #/NS key to view
the #/NS function key options:
5. Use the CHARGE1 and the CHARGE2 keys to scroll up and down through the
options for the function key you have selected. The pages that follow detail the
reference information for each key.
6. Select an option and press the CASH to set that option value.
7. From the YES/No type option screen, Press the CHARGE2 key for YES and the
CHARGE1 key for NO. Press the CASH to confirm the option selection.
8. Press CLEAR at any time to return to the FUNCTION KEY menu without saving
changes.