Sam4s ER-260EJ - NLU Code# Program

118 • Program Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
NLU Code# Program
NLUs are fixed keys on the keyboard (like traditional department keys) that access specific PLU’s.
On the default keyboard, the PLU# assigned to the NLU key is the same, i.e. NLU key number one is
PLU #1. However, with this program, you can assign any PLU number you wish to any one of the
NLU keys.
1. From the PLU PROGRAMMING screen, select “4.NLU CODE# PGM” (or press 4
to go to the option directly). Press CASH to display the NLU CODE# PGM screen:
NLU CODE# PGM
ENTER NLU KEY
2. Press one of the fifteen NLU keys on the keyboard, or press CLEAR to exit.
ENTER NEW PLU #
0
3. The current PLU code number displays. Type the new PLU code number you wish
to use for this NLU key, press CASH.
4. The NLU CODE PROGRAM screen returns. Continue from step 1 to program
additional NLU keys, or press CLEAR to exit.