158 • Program Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
Taxes Programming
The ER-260EJ/ER-265EJ allows three calculation options for each of the four possible taxes.
Add-On - most sales taxes can be programmed by entering an add-on tax
percentage rate.
VAT - if tax is included in the cost of the item, you can use value added tax
(VAT) to calculate the tax share of each sale.
GST - for the Canadian Goods and Services tax (GST) can be set using tax rate 4.
Important Note: After you have entered your tax program, test for accuracy by entering
several transactions of different dollar amounts. Carefully check to make sure the tax charged
by the cash register matches the tax amounts on the printed tax chart for your area. As a
merchant, you are responsible for accurate tax collection. If the cash register is not calculating
tax accurately, or if you cannot program your tax properly from the information in this manual,
contact your Dealer for assistance.
Programming an Add-On Tax Rate Percentage
When tax requirements can be met using a straight percentage rate, use the following method to
program a tax as a straight percentage.
1. Move the mode key to the P position to display the Program Mode menu.
2. With the first option, “PLU” displayed, use the CHARGE1 and the CHARGE2 keys
to select “7.TAXES” (or press 7 to go to the option directly.) Press CASH to view the
Tax selection screen.
ENTER TAX#
(1-4) 0
3. Enter the Tax number and press the CASH key to confirm:
TAXES
1.DESC : [TAX1]
4. Press CHARGE1 to select the tax type:
TAXES
2.TYPE [ADD-ON]
5. At the TYPE field, use the CHARGE1 and the CHARGE2 keys to select ADD-ON
and press the CASH key to confirm.
6. Press CHARGE1 to view the RATE field:
TAXES
3.RATE [6.000]
7. Input the tax rate, for example: if the tax is 6 percent, enter 6000. Press the CASH key.
8. Continue to program additional taxes or press CLEAR to return to the PROGRAM
MODE screen.
To Next Page
Loading...
