Sam4s ER-260EJ - Stock Entry Procedures

Sam4s ER-260EJ/256EJ OP Manual v1.20 Manager Mode (X Mode) • 75
Stock Entry
Note: Before program PLU Stock, ‘Inventory Item’ option must be set as ‘Y’ in the PLU
program.
1. Move the key to the X lock position to display the MANAGER MODE menu.
2. Press CASH to display the X Mode menu.
3. Press CHARGE1 four times to display the “STOCK ENTRY” option (or press 5
display the option directly):
X MODE
5.STOCK ENTRY
4. Press CASH to display the stock entry menu.
STOCK ENTRY
1.PROGRAM
One PLU
5. With “PROGRAM” displayed on the menu, press CASH to begin (or press 1 and
then CASH).
PROGRAM
1.ONE
6. With “ONE” displayed on the menu, press CASH to begin (or press 1 and then
CASH).
ENTER PLU #
0
7. Enter the PLU number you wish to program. (Note that the PLU must be activated
and set as an inventory item or an error will result.)
ENTER PLU #
0
Range of PLU’s
8. With “PROGRAM” displayed on the menu, press CHARGE1 and then CASH to
begin (or press 2 and then CASH).
ENTER FROM PLU #
0