Sam4s ER-260EJ - Post Tender; Receipt On;Off and Receipt on Request

Sam4s ER-260EJ/256EJ OP Manual v1.20 Operations • 59
Post Tender
Post tendering means computing change after the sale has been totaled and the drawer is open. This
feature is useful when a customer changes the amount of the tender or when a "quick change artist"
confuses a clerk. Normally, this function is not allowed. If you wish to allow post tendering, you
must set the appropriate options program. See “SYSTEM” of "Options Programming" in the
"Program Mode Programming" chapter. (A separate system option determines whether the drawer
opens on the post tender.)
1. Register the items you wish to sell.
2. Press CASH:
CASH
3. The display will indicate the total of the
cash sale.
4. Enter the amount of the new tender, Press
CASH:
CASH 0 0 2 0
5. The display will indicate the change due.
THANK-YOU
CALL AGAIN
03/22/2017 TUE 08:33
PLU1 T1 $2.99
TAX1 $0.18
TOTAL $3.17
CASH $3.17
CLERK 01 000053 00001
Receipt On/Off and Receipt on Request
When a receipt is not normally issued, you can turn the receipt function off. See "Receipt On/Off" in
the "Manager Mode (X Mode)" chapter.
If the receipt is off, you can still issue a receipt after the sale has been completed.
Printing a Receipt after the Sale
After the sale, has been tendered, but before the next transaction is started, press CASH:
CASH