Sam4s ER-260EJ - PROMO Key Function Options; RECD on ACCT 1-3 Key Function Options

134 • Program Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
PROMO Key Function Options
Option Entry Description
1 DESC
Alpha
numeric
24 character
You can program a unique descriptor. The default descriptor
is PROMO.
2 KEY DISABLE Y or N Select Y to disable this function.
3
UNDER
MANAGER
CONTROL
Y or N
Select Y if you do not want the operator to use this function
in REGISTER MODE. When selected, the function is
allowed only in the MANAGER MODE.
4
TAXABLE BY
TAX1
TAXABLE BY
TAX2
TAXABLE BY
TAX3
TAXABLE BY
TAX4
Y or N
If an item is taxable and you wish to remove taxes and a cost
of the item when using the PROMO key, set the taxable
status for the appropriate tax to Y.
RECD ON ACCT 1-3 Key Function Options
Option Entry Description
1 DESC
Alpha
numeric
24 character
You can program a unique descriptor. The default descriptors
are RA 1-3.
2 HALO
7-digit
amount
You can limit errors by setting the maximum amount that can
be used with this function. "0" means that there is no entry
limit.
3 KEY DISABLE Y or N Select Y to disable this function.
4
UNDER
MANAGER
CONTROL
Y or N
Select Y if you do not want to allow the operator use of this
function in REGISTER MODE. When selected, the
function is allowed only in the MANAGER MODE.
5
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.