Sam4s ER-260EJ - Programming a VAT (Value Added Tax)

Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 159
Programming a VAT (Value Added Tax)
When a tax is included in the cost of the item, you can use the value-added tax (VAT) program to
calculate the tax share of each sale.
1. Move the mode key to the P position to display the Program Mode menu.
2. With the first option, “PLU” displayed, use the CHARGE1 and the CHARGE2 keys
to select “7.TAXES” (or press 7 to go to the option directly.) Press CASH to view the
Tax selection screen.
ENTER TAX#
(1-4) 0
3. Enter the Tax number and press the CASH key to confirm:
TAXES
1.DESC : [TAX1]
4. Press CHARGE1 to select the tax type:
TAXES
2.TYPE [VAT]
5. At the TYPE field, use the CHARGE1 and the CHARGE2 keys to select VAT and
press the CASH key to confirm.
6. Press CHARGE1 to view the RATE field:
TAXES
3.RATE [6.000]
7. Input the tax rate, for example: if the VAT tax is 6 percent, enter 6000. Press the CASH
key.
8. Continue to program additional taxes or press CLEAR to return to the PROGRAM
MODE screen.