84 • Service Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
Accessing Service Mode Functions
1. Move the key to the S lock position to display the Service Mode menu. (The S position is
not labeled. The key marked “C” will access this position.)
SERVICE MODE
1.SELF TEST
2. You can now use the CHARGE1 and the CHARGE2 keys to scroll up and down
through the Service Mode menu. Or, if you already know the menu number of the
Service Mode function you with to perform, you can enter the digit (1-8) directly. The
following S Mode functions are available:
1.SELF TEST
2.MEMORY CLEAR
3.ALLOCATION
4.KEY ASSIGN
5.DEFINE PORT
6.ECR SETUP
7.PROGRAM BACKUP
8.HELP MENU
To Next Page
Loading...
