Sam4s ER-260EJ - CHECK Key Function Options

128 • Program Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
CHECK Key Function Options
Option Entry Description
1 DESC
Alphanumeric
24 characters
You can program a unique descriptor. The default descriptor
is CHECK.
2 HALO
7-digit
amount
You can limit errors by setting the maximum amount that
can be tendered. "0" means that there is no entry limit.
3
AMOUNT TEND
COMP.
Y or N
Select Y if you want to force the operator to enter the
tendered amount and let the register calculate the change.
4
OVER/UNDER
TENDER IN MGR
CONTROL
Y or N
Select Y if you do not want the operator to tender more than
the amount of the sale and issue change. When selected,
over tendering is allowed only in the MANAGER MODE.
5
DISABLE UNDER
TEND.
Y or N
Select Y if you do not want the operator to tender less than
the amount of the sale.
6
DOES DRAWER
OPEN
Y or N
Select N if you do not want the drawer to be opened with
this key.
7
8
9
10
EXEMPT TAX 1
EXEMPT TAX 2
EXEMPT TAX 3
EXEMPT TAX 4
Y or N
Select Y to exempt the appropriate tax automatically when
finalized with this key.
11
COMPULSORY
CHECK
ENDORSEMENT
Y or N
Choose Y to enforce check endorsement if an optional
printer with endorsement capability is connected to a Serial
port.
12
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.