Sam4s ER-260EJ - EMV Related System Options

188 • Integrated Payment Appendix Sam4s ER-260EJ/256EJ OP Manual v1.20
System Options
Options are organized into different categories, i.e. System, Print, Report, etc. to make it easier for the
programmer to find and set options.
1. Move the key to the P lock position to display the Program Mode menu.
2. With the first option, “PLU” displayed, use the CHARGE1 and the CHARGE2 keys to
select “4.OPTIONS” (or press 4 to go to the option directly.) Press CASH to view the
OPTIONS screen.
3. Press 1 CASH to select the SYSTEM options category.
4. Use the CHARGE1 and the CHARGE2 keys to scroll up and down through the options
in the category. If a YES or NO decision is required, Press the CHARGE2 key for YES and
the CHARGE1 key for NO.
5. Press the CASH key to confirm the option value and return system option screen.
EMV Related System Options
Option Entry Description
45 EFT DRAFT DATATRAN
FINE DINING
Select if the EFT draft is Fine Dining. Fine dining draft
will print a tip line. Select Datatran to not print tip line.
46 MSR CONNECT DATATRAN
PDC
Select device where the card reader is connected; For
EMV installations always select PDC.
47 PIN-PAD TYPE DUKPT
ROTAT
Always choose PIN-Pad type as DUKPT.
48 PIN-PAD PORT 0-3 Select the port# where Pin-Pad is connected
49
COPY OF DATATRAN
RECEIPT
0-99 Set desired number of EFT receipts to print (0-99)
(default = 1)
50
MARK CARD No ON
ALL EFT DRAFTS
Y or N Set to N to NOT print card number on EFT receipts.
51
NO SIGN IF TRANS
TTL LESS THAN
0.00 Not Used
52 “test” CLERK ID? Y or N Always set to N
53
CARDHOLDER
NAME?
Y or N
Set to Y if you want the cardholder’s name printed on
EFT receipts.