124 • Program Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
%1 -%5 Function Options
# Option Entry Description
1 DESC
Alpha numeric
24 character
You can program a unique descriptor. The default descriptors
are % 1-4.
2 AMOUNT:Y %:N Y or N
Select Y if you wish for this key to apply an amount (as in a
coupon). Select N if you wish for this key to apply the
percentage (as in a discount or surcharge).
3 AMOUNT/RATE 5 digits
If the function is an amount, enter the amount from 0 to 999.99.
If not zero, the amount will be the preset coupon amount. If the
function is a percentage, enter a percentage from 0 to 99.999%.
If not zero, the percentage will be the preset percentage
4 KEY DISABLE Y or N Select Y to disable this function.
5
UNDER MANAGER
CONTROL
Y or N
Select Y if you do not want the operator to use this function in
REGISTER mode. When selected, the function is allowed only
in the MANAGER MODE.
6 OPEN:Y PRESET:N Y or N
Select Y if you wish the amount or percentage to be entered by
the operator; select N if you wish the amount or percentage to be
preset.
7 SALE:Y ITEM:N Y or N
Select Y if you wish the amount or percentage to apply to the
sale total. Select N if you wish the amount or percentage to
apply to an item.
8 OVERRIDEABLE Y or N
Select Y if you wish to enter a percentage or amount to override
the preset percentage or amount set in the RATE field.
9 POS.:Y NEG.:N Y or N
Select Y if you wish for the amount or percentage to add to the
sale total. Select N if you wish for the amount or percentage to
subtract from the sale.
10 TAXable BY TAX1
TAXable BY TAX2
TAXable BY TAX3
TAXable BY TAX4
Y or N
Select N to tax any taxable items before the discount or
surcharge is applied (tax the gross amount). Select Y to tax any
taxable items after the discount or surcharge is applied (tax the
net amount).
11
ALLOW ONLY ONE
TIME SUBTOTAL
ENTRY
Y or N
If Y, you can enter only a single coupon and you must press the
SUBTOTAL key before the coupon entry.
12
ALLOW MULTIPLE
AMOUNT DISCOUNT
(COUPON) WITHOUT
SUBTOTAL ENTRY
Y or N
If you set a % key to be used for vendor coupons (i.e. amount,
negative and sale status) then choose Y to allow the function to
be operated multiple times, without requiring the SUBTOTAL
key to be pressed prior to the coupon entry.
13
PRESET OVERRIDE IN
MGR ONLY
Y or N
Select Y to allow preset override only in manager operation
mode.
14
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.
To Next Page
Loading...
