Sam4s ER-260EJ - Manual Weight Entry

Sam4s ER-260EJ/256EJ OP Manual v1.20 Operations • 65
Manual Weight Entry
Note: Manual weight entry is allowed only when a scale is not connected and the Serial port is not
set to the scale function. Manual Weight is also used when voiding or returning a scale item without
using the scale.
Operators can make manual weight entries if the item has been programmed to accept them. You
must use the decimal key to enter fractional manual weights.
1. Place an item on the scale.
2. Enter the weight using the decimal key for
fractional weights. Press the SCALE key:
1 . 5 SCALE
3. Enter the price per pound on the ten-key
pad. Do not use the decimal key. For
example: for $3.00, enter:
3 0 0
4. Press a PLU key. For example: press PLU
1:
1
THANK-YOU
CALL AGAIN
03/22/2017 TUE 08:33
1.500 lb MANUAL WT. @3.00/lb
PLU1 $4.50
TAX1 $0.27
TOTAL $4.77
CASH $4.77
CLERK 01 000011 00001