Sam4s ER-260EJ - ADD CHECK Function Options; CANCEL Key Function Options

Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 125
ADD CHECK Function Options
# Option Entry Description
1 DESC
Alpha numeric
24 character
You can program a unique descriptor. The default descriptor is
ADD CHECK.
2 KEY DISABLE Y or N Select Y to disable this function.
3
COMPULSORY
BEFORE
TENDERING
Y or N
Select Y if you want to force the operator to use the ADD
CHECK function before tendering.
4
ADVANCE THE
CONSECUTIVE #
Y or N
Select Y if you want to advance the consecutive number each
time the ADD CHECK key is used.
5
DELETE THE
PRE/POSTAMBLE
Y or N
Select Y if you want to delete the preamble and postamble each
time the ADD CHECK key is used.
6 EXEMPT TAX 1
EXEMPT TAX 2
EXEMPT TAX 3
EXEMPT TAX 4
Y or N
Select Y to exempt the appropriate tax automatically when
finalized with this key.
7
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.
CANCEL Key Function Options
# Option Entry Description
1 DESC
Alpha numeric
24 character
You can program a unique descriptor. The default descriptor is
CANCEL.
2 HALO 7-digit amount
You can limit errors by setting the maximum amount that can be
used with this function. "0" means that there is no entry limit.
3 KEY DISABLE Y or N Select Y to disable this function.
4
UNDER MANAGER
CONTROL
Y or N
Select Y if you do not want to allow the operator use of this
function in REGISTER MODE. When selected, the function
is allowed only in the MANAGER MODE.
5
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.