Sam4s ER-260EJ - Display Modes

16 • Introduction Sam4s ER-260EJ/256EJ OP Manual v1.20
Display
The operator display on the ER-260EJ/ER-265EJ comes with a 192 x 64 Graphic blue backlit LCD or
2-Line 16-character blue backlit LCD.
As items are registers, the item description will display on the first line; price and quantity
information will display on the second line. Additional information and error messages will display
as appropriate, and may be accompanied by an error tone.
Register Mode
Note: The “CLOSED” message will display if a clerk is not signed on.
REGISTER MODE
CLOSED
Once a clerk is signed on, “REGISTER MODE” displays:
REGISTER MODE
0.00
Void Mode
Note: The “CLOSED” message will display if a clerk is not signed on.
VOID MODE
CLOSED
Once a clerk is signed on, “VOID MODE” displays:
VOID MODE
0.00
Manager Mode (X)
MANAGER MODE
0.00
 Press the CASH to display X mode.
X MODE
1.X REPORTS
Z Mode
Z MODE
1.Z REPORTS
Program Mode (P)
PROGRAM MODE
1.PLU
Service Mode (S)
SERVICE MODE
1.SELF TEST