Sam4s ER-260EJ - Installing the Paper Roll

26 • Getting Started Sam4s ER-260EJ/256EJ OP Manual v1.20
Installing the Paper
1. Remove the printer cover. Figure
○
A
2. Lift up to open the paper cover. Figure
○
B
○
C
3. Ensure that the paper is being fed from the bottom of the roll and then close the paper
cover slowly until it locks firmly. Figure
○
D
4. Pass the leading edge of the paper through the tear-bar slot. Tear off the excess paper.
Replace the printer cover. Figure
○
E
○
F
5. Replace the printer cover. Figure
○
G
○
H
6. Press the feed button to ensure paper feeds out of well. Figure
○
I