Sam4s ER-260EJ - Electronic Journal Operations

Sam4s ER-260EJ/256EJ OP Manual v1.20 Manager Mode (X Mode) • 71
Electronic Journal Operation
An electronic journal feature is available on the ER-260EJ/ER-265EJ. The electronic journal captures
the sales journal in the register memory. If you intend to use the electronic journal, you must allocate
sufficient memory (see “ALLOCATION” in the "Service Mode Programming" chapter) and activate
the journal and set related journal capture options (see “EJ” of “Options Programming” in the
“Program Mode Programming” chapter.)
Use this program to print all or selected parts of the journal memory. Note: this program will not
clear the electronic journal. See “RESET E.J” in the “Z MODE”.
1. Move the key to the X lock position to display the MANAGER MODE menu.
2. Press CASH to display the X Mode menu.
3. From the X Mode menu press CASH (or press 1 and CASH) to select the X Reports
menu with the first option displayed:
X REPORTS
1.FINANCIAL
4. Use the CHARGE1 key to scroll through the X Mode menu until select #8 “EJ”
displays, or, you can enter the digit “8” to select “EJ” directly. Press CASH to
display the EJ menu selections:
EJ
1.ALL
5. You can now use the CHARGE1 and the CHARGE2 keys to scroll up and down
through the eighteen different EJ report options: When a specific EJ report is
selected, press CASH to continue.
1.ALL
2.CASH
3.CHECK
4.CHARGE
5.PERCENT
6.RA/PO
7.RETURN
8.ERR CORR./VOID
9.NOSALE
10.CANCEL
11.NEGATIVE
12.RESET REPORT
13.VOID MODE
14.TRAINING
15.BY CLERK
16.BY DATE
17.BY RCPT NO.
18.BY LINE