Sam4s ER-260EJ - Program Restore

96 • Service Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
Program Restore
Set the store name on the ER-260EJ/ER-265EJ to match the name of the store folder you wish to
restore.
CAUTION: Memory allocation must be set the same as the saved program. Be sure to print
out the memory allocation so that it can be re-entered before restoring the program.
1. Move the key to the S lock position to display the Service Mode menu.
2. From the Service Mode menu press CHARGE1 until “PROGRAM BACKUP” is
selected and press CASH; (or press 7 CASH to view the option directly.)
3. The PROGRAM BACKUP menu displays:
PROGRAM BACKUP
1.SD
4. Use CHARGE1 and the CHARGE2 keys to select SD or USB (or press 1 or 2 to
select the memory device.) Press CASH to display the menu:
SD
1.PGM BACKUP
5. Insert the SD card in the register’s SD slot or insert a USB memory stick in the USB port
on the connection panel.
6. Use the CHARGE1 and the CHARGE2 keys to scroll up and down to select ‘PGM
RESTORE’; (or, press 2 CASH to go to “PGM RESTORE” directly).
SD
2.PGM RESTORE
7. Press CASH. The messages:
PGM RESTORE
PLEASE WAIT...
PGM RESTORE
SUCCESS !
8. Press CLEAR three times to return to the main Service Mode menu.